Altriset
Syngenta_PMP · Chlorantraniliprole 18.4% · EPA Reg 100-1503 · TERMITICIDE
Document last checked 2015-03-12
About this product
Active ingredient
Chlorantraniliprole 18.4%
Manufacturer
Syngenta_PMP
Category
TERMITICIDE
Full details for Altriset
Professional research coverage
Research rank #114 · top 250
This metadata reports what the research package has linked and reviewed. It does not restate rates, sites, PPE, mixing, or application directions. Always use the labeling accompanying the product in hand and applicable state supplemental labeling.
- Product identity
- Accepted
- Label document
- Verified
- SDS document
- Review Required
- Research records
- 2 sources · 5 open review items
Publication state: metadata only.
Applicator discussion
Nothing here is label direction — the label is the law.
These are notes from other applicators, moderated before they appear.
Always work from this product's verified label.
Check the labeling accompanying the product and applicable state requirements.
According to the label From the product label
These details were extracted from this product's label PDF.
The label is the law.
Confirm every rate, site, restriction and safety requirement against the label before mixing or applying.
Check for a
state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below.
View the verified label →
·
EPA registration data for Reg. 100-1503 →
This product is a liquid formulation containing altriset as the active ingredient. It is used to control subterranean termites and drywood termites. It can be applied to structures (pre-construction or post-construction), localized infestations, and non-structural items such as posts, poles, trees, and firewood.
Pests covered (5)
subterranean termitedrywood termitestermiteNONSUBTERRANEAN TERMITESSUBTERRANEAN TERMITES
Areas treatable (18)
structurespost-constructionpre-constructionlocalized infestationsnon-structural (posts, poles, trees, firewood)WOOD STRUCTURES (MASONRY JOINTS) (SOIL CONTACT NONFUMIGATION TREATMENT)LOGS (SOIL CONTACT NONFUMIGATION TREATMENT)FIREWOOD (SOIL CONTACT NONFUMIGATION TREATMENT)BUILDINGS (NONAGRICULTURAL) (PERIMETER) (SOIL TREATMENT)CONCRETE SLABSORNAMENTAL TREES (INJECTION TREATMENT)GARAGESPATIOSDRIVEWAYSWALKSPOLES/POSTS (SOIL CONTACT NONFUMIGATION TREATMENT)STUMPS (INJECTION TREATMENT)DRAINS
Application instructions from the label 5
structures
To maximize effectiveness, apply in a manner as to provide a continuous treatment zone. Altriset may not be completely effective unless conducive conditions (i.e., moisture problems and direct wood-to-soil contact) are corrected.
- Target pest
- subterranean termite
- Dilution
- 0.05%-0.1%
post-construction
Can be used for remedial control or preventive termite protection.
- Target pest
- subterranean termite
- Dilution
- 0.05%-0.1%
pre-construction
Preventive treatment.
- Target pest
- subterranean termite
- Dilution
- 0.05%-0.1%
localized infestations
- Target pest
- drywood termites
- Dilution
- 0.05%-0.1%
non-structural (posts, poles, trees, firewood)
- Target pest
- termite
- Dilution
- 0.05%-0.1%
Mixing instructions 8
| Amount |
Per |
Finished strength |
| 0.34 fl oz (10 mL) |
1 gallon |
0.05% |
| 0.68 fl oz (20 mL) |
1 gallon |
0.1% |
| 8.5 fl oz (250 mL) |
25 gallons |
0.05% |
| 17 fl oz (500 mL) |
25 gallons |
0.1% |
| 17 fl oz or 1 pt 1 oz (500 mL) |
50 gallons |
0.05% |
| 34 fl oz or 2 pt 2 oz (1 L) |
50 gallons |
0.1% |
| 34 fl oz or 2 pt 2 oz (1 L) |
100 gallons |
0.05% |
| 68 fl oz or 4 pt 4 oz (2 L) |
100 gallons |
0.1% |