Altriset

Syngenta_PMP · Chlorantraniliprole 18.4% · EPA Reg 100-1503 · TERMITICIDE Document last checked 2015-03-12

According to the label From the product label

These details were extracted from this product's label PDF. The label is the law. Confirm every rate, site, restriction and safety requirement against the label before mixing or applying. Check for a state supplemental label; a product may be restricted or prohibited in a state or site even when a rate appears below. View the verified label → · EPA registration data for Reg. 100-1503 →

This product is a liquid formulation containing altriset as the active ingredient. It is used to control subterranean termites and drywood termites. It can be applied to structures (pre-construction or post-construction), localized infestations, and non-structural items such as posts, poles, trees, and firewood.

Pests covered (5)

subterranean termitedrywood termitestermiteNONSUBTERRANEAN TERMITESSUBTERRANEAN TERMITES

Areas treatable (18)

structurespost-constructionpre-constructionlocalized infestationsnon-structural (posts, poles, trees, firewood)WOOD STRUCTURES (MASONRY JOINTS) (SOIL CONTACT NONFUMIGATION TREATMENT)LOGS (SOIL CONTACT NONFUMIGATION TREATMENT)FIREWOOD (SOIL CONTACT NONFUMIGATION TREATMENT)BUILDINGS (NONAGRICULTURAL) (PERIMETER) (SOIL TREATMENT)CONCRETE SLABSORNAMENTAL TREES (INJECTION TREATMENT)GARAGESPATIOSDRIVEWAYSWALKSPOLES/POSTS (SOIL CONTACT NONFUMIGATION TREATMENT)STUMPS (INJECTION TREATMENT)DRAINS

Application instructions from the label 5

structures

To maximize effectiveness, apply in a manner as to provide a continuous treatment zone. Altriset may not be completely effective unless conducive conditions (i.e., moisture problems and direct wood-to-soil contact) are corrected.

Target pest: subterranean termite
Dilution: 0.05%-0.1%

post-construction

Can be used for remedial control or preventive termite protection.

Target pest: subterranean termite
Dilution: 0.05%-0.1%

pre-construction

Preventive treatment.

Target pest: subterranean termite
Dilution: 0.05%-0.1%

localized infestations

Target pest: drywood termites
Dilution: 0.05%-0.1%

non-structural (posts, poles, trees, firewood)

Target pest: termite
Dilution: 0.05%-0.1%

Mixing instructions 8

Amount	Per	Finished strength
0.34 fl oz (10 mL)	1 gallon	0.05%
0.68 fl oz (20 mL)	1 gallon	0.1%
8.5 fl oz (250 mL)	25 gallons	0.05%
17 fl oz (500 mL)	25 gallons	0.1%
17 fl oz or 1 pt 1 oz (500 mL)	50 gallons	0.05%
34 fl oz or 2 pt 2 oz (1 L)	50 gallons	0.1%
34 fl oz or 2 pt 2 oz (1 L)	100 gallons	0.05%
68 fl oz or 4 pt 4 oz (2 L)	100 gallons	0.1%

⬇ Download PDF Anyone can view, print or download this document — no account needed.

Document text and citations

Extracted text is retained internally for document review and page-level citation checks. The complete third-party text is not republished here; use the document viewer above.

Reference only. Always read and follow the most current EPA-approved label on the product container. State and local restrictions may apply that are not reflected in this digitised copy. Verify the EPA registration number and revision date before use.